D3 Cantilever Gates
Welded cantilever slide gates: residential F.F.H. gates 4′ to 6′ high for 10′ to 14′ openings, commercial F.F.H. gates 4′ to 8′ high and B.W.O. gates 6′ to 8′ high for 10′ to 30′ openings, and extra heavy industrial gates for single openings to 50′.
No line in this section matches. or search the whole catalogue above.
Cantilever slide gates
- Must be used for automatic slide gate operators
- Excellent for areas where the arc of the swing gate will interfere with storage area or roadways
- Maximum single gate opening width of 30′ (double gate width of 60′)
- Most common single gate opening width of 24′
- Gate is fully supported off the ground on four rollers
- Gate posts (3 required for single gate, 4 required for double gate)
- Four rollers required for each gate panel
Total gate length = opening size × 1.5, then add 1′ (e.g. 24′ opening: 24′ × 1.5 = 36′, 36′ + 1′ = 37′)
Construction
- 1 7/8″ O.D. Schedule 40 top/bottom rails and end uprights
- 1 3/8″ O.D. .090 wall vertical and horizontal braces
Gate posts
Gate posts on either side of gate opening are to be set to the actual opening (e.g. 24′) face to face of post. Gate posts for the counter balance are set to be 1/2 of the opening from centre to centre of post (e.g. 12′ for a 24′ gate).
Residential F.F.H. cantilever
9 lines
- Welded single panels are built with 1 5/8″ (Sch40) rail
- 1 3/8″ (.083) vertical
- 1 3/8″ (.083) bracing
- Come finished 11 or 9 gauge fabric
- Excellent for areas where the arc of the swing gate will interfere with storage area or roadways
- Maximum single gate opening width of 14′ (double gate width of 28′)
- Most common single gate opening width of 12′
- Gate is fully supported off the ground on four rollers (required)
- Gate posts (3 required for single gate, 4 required for double gate)
| Description | Stock | Weight lb | Part number | Quote list |
|---|---|---|---|---|
| Welded single slide, 4′ high | ||||
| 120″ opening (10′) | Special order | 189 lb | 10-4RC | |
| 144″ opening (12′) | Special order | 210 lb | 12-4RC | |
| 168″ opening (14′) | Special order | 243 lb | 14-4RC | |
| Welded single slide, 5′ high | ||||
| 120″ opening (10′) | Special order | 214 lb | 10-5RC | |
| 144″ opening (12′) | Special order | 235 lb | 12-5RC | |
| 168″ opening (14′) | Special order | 272 lb | 14-5RC | |
| Welded single slide, 6′ high | ||||
| 120″ opening (10′) | Special order | 238 lb | 10-6RC | |
| 144″ opening (12′) | Special order | 262 lb | 12-6RC | |
| 168″ opening (14′) | Special order | 301 lb | 14-6RC | |
Commercial F.F.H. cantilever
40 lines
- Welded single panels are built with 1 7/8″ or 2 3/8″ (Sch40) rail
- 1 5/8″ (.083) vertical
- 1 3/8″ (.083) bracing
- Come finished 9 gauge fabric
| Description | Weight lb | Part number | Quote list |
|---|---|---|---|
| Welded single slide, 4′ high | |||
| 120″ opening (10′) | 195 lb | 10-4FC | |
| 144″ opening (12′) | 209 lb | 12-4FC | |
| 192″ opening (16′) | 253 lb | 16-4FC | |
| 240″ opening (20′) | 311 lb | 20-4FC | |
| 288″ opening (24′) | 371 lb | 24-4FC | |
| 192″ opening (26′) | 395 lb | 26-4FC | |
| 240″ opening (28′) | 420 lb | 28-4FC | |
| 360″ opening (30′) | 433 lb | 30-4FC | |
| Welded single slide, 5′ high | |||
| 120″ opening (10′) | 212 lb | 10-5FC | |
| 144″ opening (12′) | 227 lb | 12-5FC | |
| 192″ opening (16′) | 275 lb | 16-5FC | |
| 240″ opening (20′) | 339 lb | 20-5FC | |
| 288″ opening (24′) | 403 lb | 24-5FC | |
| 192″ opening (26′) | 426 lb | 26-5FC | |
| 240″ opening (28′) | 452 lb | 28-5FC | |
| 360″ opening (30′) | 469 lb | 30-5FC | |
| Welded single slide, 6′ high | |||
| 120″ opening (10′) | 229 lb | 10-6FC | |
| 144″ opening (12′) | 246 lb | 12-6FC | |
| 192″ opening (16′) | 297 lb | 16-6FC | |
| 240″ opening (20′) | 366 lb | 20-6FC | |
| 288″ opening (24′) | 435 lb | 24-6FC | |
| 192″ opening (26′) | 460 lb | 26-6FC | |
| 240″ opening (28′) | 485 lb | 28-6FC | |
| 360″ opening (30′) | 504 lb | 30-6FC | |
| Welded single slide, 7′ high | |||
| 120″ opening (10′) | 246 lb | 10-7FC | |
| 144″ opening (12′) | 264 lb | 12-7FC | |
| 192″ opening (16′) | 319 lb | 16-7FC | |
| 240″ opening (20′) | 393 lb | 20-7FC | |
| 288″ opening (24′) | 467 lb | 24-7FC | |
| 192″ opening (26′) | 494 lb | 26-7FC | |
| 240″ opening (28′) | 520 lb | 28-7FC | |
| 360″ opening (30′) | 540 lb | 30-7FC | |
| Welded single slide, 8′ high | |||
| 120″ opening (10′) | 264 lb | 10-8FC | |
| 144″ opening (12′) | 282 lb | 12-8FC | |
| 192″ opening (16′) | 341 lb | 16-8FC | |
| 240″ opening (20′) | 420 lb | 20-8FC | |
| 288″ opening (24′) | 500 lb | 24-8FC | |
| 192″ opening (26′) | 528 lb | 26-8FC | |
| 240″ opening (28′) | 554 lb | 28-8FC | |
| 360″ opening (30′) | 575 lb | 30-8FC | |
Commercial B.W.O. cantilever
24 lines
- Welded single panels are built with 1 7/8″ or 2 3/8″ (Sch40) rail
- 1 5/8″ (.083) vertical
- 1 3/8″ (.083) bracing
- Comes finished 9 gauge fabric
| Description | Weight lb | Part number | Quote list |
|---|---|---|---|
| Welded single slide, 6′ high | |||
| 120″ opening (10′) | 239 lb | 10-6BC | |
| 144″ opening (12′) | 257 lb | 12-6BC | |
| 192″ opening (16′) | 309 lb | 16-6BC | |
| 240″ opening (20′) | 378 lb | 20-6BC | |
| 288″ opening (24′) | 448 lb | 24-6BC | |
| 192″ opening (26′) | 475 lb | 26-6BC | |
| 240″ opening (28′) | 500 lb | 28-6BC | |
| 360″ opening (30′) | 519 lb | 30-6BC | |
| Welded single slide, 7′ high | |||
| 120″ opening (10′) | 256 lb | 10-7BC | |
| 144″ opening (12′) | 275 lb | 12-7BC | |
| 192″ opening (16′) | 331 lb | 16-7BC | |
| 240″ opening (20′) | 405 lb | 20-7BC | |
| 288″ opening (24′) | 480 lb | 24-7BC | |
| 192″ opening (26′) | 509 lb | 26-7BC | |
| 240″ opening (28′) | 535 lb | 28-7BC | |
| 360″ opening (30′) | 555 lb | 30-7BC | |
| Welded single slide, 8′ high | |||
| 120″ opening (10′) | 274 lb | 10-8BC | |
| 144″ opening (12′) | 293 lb | 12-8BC | |
| 192″ opening (16′) | 353 lb | 16-8BC | |
| 240″ opening (20′) | 432 lb | 20-8BC | |
| 288″ opening (24′) | 513 lb | 24-8BC | |
| 192″ opening (26′) | 543 lb | 26-8BC | |
| 240″ opening (28′) | 569 lb | 28-8BC | |
| 360″ opening (30′) | 590 lb | 30-8BC | |
Extra heavy industrial sliding cantilever gates
For single opening sizes to 50′ and double opening sizes to 100′
Phoenix Fence has installed and tested single sliding cantilever gates to 50′ openings, and double sliding cantilever gates to 100′ openings, up to 8′ high.
Gates are manufactured at our Edmonton facility and have been installed and tested at our facility for over 5 years.
These gates can be automated using the Hy-Security Slide Drive gate operators (see Gate Operator section), in conjunction with the tandem precision gate rollers (see Section E2, page 4).
Please consult your Phoenix Fence salesperson for pricing and information.