Back to D3 Cantilever Gates
Phoenix Fence Corp.
Product Catalogue 2026
D3Cantilever Gates

Welded cantilever slide gates: residential F.F.H. gates 4′ to 6′ high for 10′ to 14′ openings, commercial F.F.H. gates 4′ to 8′ high and B.W.O. gates 6′ to 8′ high for 10′ to 30′ openings, and extra heavy industrial gates for single openings to 50′. 73 lines.

Cantilever slide gates

End view of a cantilever gate carried on rollers on its post, without barbed wireEnd view of a cantilever gate carried on rollers on its post, with a barbed wire armDrawing of a single cantilever slide gate showing the gate opening, the counterbalance, the gate rollers and the total gate lengthDrawing of a double cantilever slide gate showing the opening size and the post centres
  • Must be used for automatic slide gate operators
  • Excellent for areas where the arc of the swing gate will interfere with storage area or roadways
  • Maximum single gate opening width of 30′ (double gate width of 60′)
  • Most common single gate opening width of 24′
  • Gate is fully supported off the ground on four rollers
  • Gate posts (3 required for single gate, 4 required for double gate)
  • Four rollers required for each gate panel

Total gate length = opening size × 1.5, then add 1′ (e.g. 24′ opening: 24′ × 1.5 = 36′, 36′ + 1′ = 37′)

Construction

  • 1 7/8″ O.D. Schedule 40 top/bottom rails and end uprights
  • 1 3/8″ O.D. .090 wall vertical and horizontal braces

Gate posts

Gate posts on either side of gate opening are to be set to the actual opening (e.g. 24′) face to face of post. Gate posts for the counter balance are set to be 1/2 of the opening from centre to centre of post (e.g. 12′ for a 24′ gate).

Residential F.F.H. cantilever

  • Welded single panels are built with 1 5/8″ (Sch40) rail
  • 1 3/8″ (.083) vertical
  • 1 3/8″ (.083) bracing
  • Come finished 11 or 9 gauge fabric
  • Excellent for areas where the arc of the swing gate will interfere with storage area or roadways
  • Maximum single gate opening width of 14′ (double gate width of 28′)
  • Most common single gate opening width of 12′
  • Gate is fully supported off the ground on four rollers (required)
  • Gate posts (3 required for single gate, 4 required for double gate)
DescriptionStockWeight lbPart number
Welded single slide, 4′ high
120″ opening (10′)Special order18910-4RC
144″ opening (12′)Special order21012-4RC
168″ opening (14′)Special order24314-4RC
Welded single slide, 5′ high
120″ opening (10′)Special order21410-5RC
144″ opening (12′)Special order23512-5RC
168″ opening (14′)Special order27214-5RC
Welded single slide, 6′ high
120″ opening (10′)Special order23810-6RC
144″ opening (12′)Special order26212-6RC
168″ opening (14′)Special order30114-6RC

Commercial F.F.H. cantilever

  • Welded single panels are built with 1 7/8″ or 2 3/8″ (Sch40) rail
  • 1 5/8″ (.083) vertical
  • 1 3/8″ (.083) bracing
  • Come finished 9 gauge fabric
DescriptionWeight lbPart number
Welded single slide, 4′ high
120″ opening (10′)19510-4FC
144″ opening (12′)20912-4FC
192″ opening (16′)25316-4FC
240″ opening (20′)31120-4FC
288″ opening (24′)37124-4FC
192″ opening (26′)39526-4FC
240″ opening (28′)42028-4FC
360″ opening (30′)43330-4FC
Welded single slide, 5′ high
120″ opening (10′)21210-5FC
144″ opening (12′)22712-5FC
192″ opening (16′)27516-5FC
240″ opening (20′)33920-5FC
288″ opening (24′)40324-5FC
192″ opening (26′)42626-5FC
240″ opening (28′)45228-5FC
360″ opening (30′)46930-5FC
Welded single slide, 6′ high
120″ opening (10′)22910-6FC
144″ opening (12′)24612-6FC
192″ opening (16′)29716-6FC
240″ opening (20′)36620-6FC
288″ opening (24′)43524-6FC
192″ opening (26′)46026-6FC
240″ opening (28′)48528-6FC
360″ opening (30′)50430-6FC
Welded single slide, 7′ high
120″ opening (10′)24610-7FC
144″ opening (12′)26412-7FC
192″ opening (16′)31916-7FC
240″ opening (20′)39320-7FC
288″ opening (24′)46724-7FC
192″ opening (26′)49426-7FC
240″ opening (28′)52028-7FC
360″ opening (30′)54030-7FC
Welded single slide, 8′ high
120″ opening (10′)26410-8FC
144″ opening (12′)28212-8FC
192″ opening (16′)34116-8FC
240″ opening (20′)42020-8FC
288″ opening (24′)50024-8FC
192″ opening (26′)52826-8FC
240″ opening (28′)55428-8FC
360″ opening (30′)57530-8FC

Commercial B.W.O. cantilever

  • Welded single panels are built with 1 7/8″ or 2 3/8″ (Sch40) rail
  • 1 5/8″ (.083) vertical
  • 1 3/8″ (.083) bracing
  • Comes finished 9 gauge fabric
DescriptionWeight lbPart number
Welded single slide, 6′ high
120″ opening (10′)23910-6BC
144″ opening (12′)25712-6BC
192″ opening (16′)30916-6BC
240″ opening (20′)37820-6BC
288″ opening (24′)44824-6BC
192″ opening (26′)47526-6BC
240″ opening (28′)50028-6BC
360″ opening (30′)51930-6BC
Welded single slide, 7′ high
120″ opening (10′)25610-7BC
144″ opening (12′)27512-7BC
192″ opening (16′)33116-7BC
240″ opening (20′)40520-7BC
288″ opening (24′)48024-7BC
192″ opening (26′)50926-7BC
240″ opening (28′)53528-7BC
360″ opening (30′)55530-7BC
Welded single slide, 8′ high
120″ opening (10′)27410-8BC
144″ opening (12′)29312-8BC
192″ opening (16′)35316-8BC
240″ opening (20′)43220-8BC
288″ opening (24′)51324-8BC
192″ opening (26′)54326-8BC
240″ opening (28′)56928-8BC
360″ opening (30′)59030-8BC

Extra heavy industrial sliding cantilever gates

For single opening sizes to 50′ and double opening sizes to 100′

Drawing of an extra heavy industrial sliding cantilever gate carried on paired gate rollers

Phoenix Fence has installed and tested single sliding cantilever gates to 50′ openings, and double sliding cantilever gates to 100′ openings, up to 8′ high.

Gates are manufactured at our Edmonton facility and have been installed and tested at our facility for over 5 years.

These gates can be automated using the Hy-Security Slide Drive gate operators (see Gate Operator section), in conjunction with the tandem precision gate rollers (see Section E2, page 4).

Please consult your Phoenix Fence salesperson for pricing and information.