Gates
Phoenix Fence manufactures, distributes and professionally installs Galvanized and Full Colour Chain Link Gates variety of styles, heights and specifications. Gates styles available are Single Swing (Welded or Bent Tube), Double Swing (Welded), and Slide Cantilever.
Welded Single Swing Gates
Welded Single Swing gates are the industry standard among fencing professionals due to the strength of an all welded construction and the added security of square corners. Single Swing gates are available for large opening sizes up to 20 feet and to match all fence heights. The standard opening size is 44 inches but any size can be made to fit your needs. Gates (frame, mesh, hardware) are manufactured in five standard colours: Galvanized, Black, White, Brown or Green.
Welded gates offer an added degree of enclosure due to the square corner construction that reduces the space between the posts and the bottom gate corners. Functional requirements and site layout should always be considered before selecting your style of gate.
Note that Gate “Opening Size” refers to the distance from inside face to inside face of the gate posts. Gate “Outside Measurement” refers to the dimension from outside edge to outside edge of the gate panel. The difference between the Opening Size and Outside Measurement is the tolerance required for the gate hinge and gate latch dimensions.
Welded Double Swing
Welded Double Swing Gates are the economical and functional solution for securing larger openings such as driveways and trailer pads. The two gate panels, which form the double swing gate, allow for less opening space than a long single gate and allow for partial opening if full access is not required. Double Swing gate are available for large opening sizes up to 40 feet (20 feet each side) and to match all fence heights. Gates (frame, mesh, hardware) are manufactured in five standard colours: Galvanized, Black, White, Brown or Green. Double swing gates come with a welded on drop pin and chain for locking the two panels together as well as a foot bolt (cane bolt) to secure one panel into the ground surface. Welded gates offer an added degree of 
enclosure due to the square corner construction that reduces the space between the posts and the bottom gate corners. Functional requirements and site layout should always be considered before selecting your style of gate.
Slide Cantilever
Slide Cantilever Gates are optimal for larger openings where the arc of the swing gate will interfere with obstructions and in applications requiring automatic gate operators. The operation of Cantilever Gates is based on a gate panel that slides through the gate opening in a linear motion fully supported above ground and between two counter balance posts each with a top and bottom roller assembly. Gate panels are typically manufactured to an overall length of “1.5 times the opening size plus 1 foot” so as to provide a counter balance section for support between the two counter balance posts. Note that there must be an adequate length of fence or an open clear line on the outside of the counter balance posts for the gate panel to slide into the fully open position. Cantilever gates are available to match all fence heights and in opening sizes up to 30 feet as a single slide (60 feet as a double slide). Gates are manufactured from a welded galvanized steel construction and available in five standard colours: Galvanized, Black, White, Brown or Green. The most reliable and functional style of automatic electric gate operators for high usage in cold weather applications are Slide Gate Operators (as opposed to Swing Gate Operators). For this reason, Slide Cantilever Gates are the ideal gate for applications requiring automatic gate operator systems. Functional requirements and site layout should always be considered before selecting your style of gate.
Bent Tube Single Swing Gates
Bent Tube gates are an economical and functional solution for providing easy access to your fenced area. They are readily available to fit opening sizes ranging from 32 to 60 inches and in all standard residential heights of 3 to 6 feet. The standard opening size is 44 inches but any size can be
manufactured for your needs. Gates (frame, mesh, hardware) are manufactured in five standard colours: Galvanized, Black, White, Brown or Green. One consideration for this style of gate is that the rounded corners do not offer the same degree of enclosure as the square corners of a welded gate. In some cases, small animals can squeeze through the space between the post and the bottom rounded gate corner. The function of your fence and gate should always be considered before choosing your style of gate.
Note that Gate “Opening Size” refers to the distance from inside face to inside face of the gate posts. Gate “Outside Measurement” refers to the dimension from outside edge to outside edge of the gate panel. The difference between the Opening Size and Outside Measurement is the tolerance required for the gate hinge and gate latch dimensions.